|
KIT L SERIES
Components for Linear Measurement
-
Small dimensions for space restricted OEM applications
-
Large mounting tolerances
-
Insensitive to contamination
-
Single or Dual optical sensor option
-
High traversing speed
-
Integrated subdividing electronics on the connector board
or in the 15-pin D-sub connector
-
Up to times 100 interpolation (before quadrature)
-
"True" Reference Mark (accurate and repeatable from both traversing directions)
-
Dynamic Amplitude and Offset Control
-
SINGLEFLEX or DOUBLEFLEX steel scale tape option
-
KIT L4: Glass scale option available
|
|
|
System
resolution
µm |
Accuracy-
grades
SINGLEFLEX steel
tape scale
±µm/m |
Accuracy-
grades
DOUBLEFLEX steel
tape scale
±µm/m |
Grating
pitch
µm |
Output signal
analog
(Vpp) |
Output signal
digital
(interpolation) |
|
see * |
±5 |
±1 to ±5 |
20 |
KIT L2-C, KIT L4-C |
-- |
1 |
±5 |
±1 to ±5 |
20 |
-- |
KIT L2-L, KIT L4-L (5) |
0,5 |
±5 |
±1 to ±5 |
20 |
-- |
KIT L2-M, KIT L4-M (10) |
0,2 |
±5 |
±1 to ±5 |
20 |
-- |
KIT L2-I, KIT L4-I (25) |
0,1 |
±5 |
±1 to ±5 |
20 |
-- |
KIT L2-N, KIT L4-N (50) |
0,05 |
±5 |
±1 to ±5 |
20 |
-- |
KIT L2-P, KIT L4-P(100) |
|
|
| * = depending on external interpolation |
|
|
|
Max. measuring length: |
steel tape scale to 7,3 m |
Position of the Reference Mark:
(RI) |
standard:
in the center of measuring length
at 50mm spacing, starting in the center of measuring length
distance coded at 1000 x GP
others on request |
Output analog: |
typical 1 Vpp |
Output digital: |
square wave signals (differential) via Line Driver RS 422 standard
with integrated Subdividing Electronics
Maximum Cable length. 3 m |
|
|
Encoder options
(complete downloadable specs at the end of the page)
KIT L2 steel tape scale with adhesive tape
KIT L4 steel tape scale with adhesive
|
|
|
*Specification subject to change without notice*
Dimensions and Mounting possibilities:
(Adobe Acrobat 5.0 or higher required) |
|
pdf