|
LIK SERIES
Compact model Exposed Linear Encoder
-
Small dimensions for space restricted applications
-
Large mounting tolerances
-
LIK 2x: Insensitive to contamination due to dual optical sensors
-
High traversing speed
-
Integrated subdividing electronics in the 15-pin D-sub connector
-
Up to times 100 interpolation (before quadrature)
-
"True" Reference Mark (accurate and repeatable from both traversing directions)
-
Dynamic Amplitude and Offset Control
-
SINGLEFLEX or DOUBLEFLEX steel scale tape option
-
LIK 41: Glass scale option available
|
|
|
System
resolution
µm |
Accuracy-
grades
SINGLEFLEX steel
tape scale
±µm/m |
Accuracy-
grades
DOUBLEFLEX steel
tape scale
±µm/m |
Grating
pitch
µm |
Output signal
analog
(Vpp) |
Output signal
digital
(interpolation) |
|
see * |
±5 |
±1 to ±5 |
20 |
LIK 2x-C, LIK 41-C |
-- |
1 |
±5 |
±1 to ±5 |
20 |
-- |
LIK 2x-L, LIK 41-L (5) |
0,5 |
±5 |
±1 to ±5 |
20 |
-- |
LIK 2x-M, LIK 41-M (10) |
0,2 |
±5 |
±1 to ±5 |
20 |
-- |
LIK 2x-I, LIK 41-I (25) |
0,1 |
±5 |
±1 to ±5 |
20 |
-- |
LIK 2x-N, LIK41-N (50) |
0,05 |
±5 |
±1 to ±5 |
20 |
-- |
LIK 2x-P, LIK 41-P(100) |
|
|
| * = depending on external interpolation |
|
|
|
Max. measuring length: |
steel tape scale to 10 m |
Position of the Reference Mark:
(RI) |
standard:
in the center of measuring length
at 50mm spacing, starting in the center of measuring length
distance coded at 1000 x GP
others on request |
Output analog: |
typical 1 Vpp |
Output digital: |
square wave signals (differential) via Line Driver RS 422 standard
with integrated Subdividing Electronics
Maximum Cable length. 3 m |
|
|
Encoder options
(complete downloadable specs at the end of the page)
LIK 21 steel tape scale with adhesive tape
LIK 22 steel tape scale with adhesive
LIK 23 steel tape scale with adhesive
LIK 41 steel tape scale with adhesive
|
|
|
*Specification subject to change without notice*
Dimensions and Mounting possibilities:
(Adobe Acrobat 5.0 or higher required) |
|
pdf