|
MSA 352
Enclosed Linear Encoder
- for retrofit of machine tools
- two sets of sealing lips for additional
contamination protection
- high mounting tolerances
- max. measuring length 3040 mm
- distance coded Reference marks (K)
- rigid mounting
- simplest assembly through mounting holes
on the extrusion ends and with mounting supports
|
|
|
System
resolution
µm |
Accuracy
±µm/measuring
length |
Grating
pitch
µm |
Output
analog (Upp) |
Output
analog (Ipp) |
Output
digital
(Subdividing factor) |
|
see * |
±5, ±10 |
20 |
--
|
MSA 352.13 |
-- |
10 |
±10 |
40 |
-- |
-- |
MSA 352.24 (1) |
5 |
±5, ±10 |
20 |
-- |
-- |
MSA 352.23 (1) |
2,5 |
±5, ±10 |
20 |
-- |
-- |
MSA 352.33 (2) |
2 |
±5, ±10 |
40 |
-- |
-- |
MSA 352.64 (5) |
1 |
±5, ±10 |
20 |
-- |
-- |
MSA 352.63 (5) |
0,5 |
±5, ±10 |
20 |
-- |
-- |
MSA 352.73 (10) |
|
|
* = depending on
external Subdividing |
|
|
|
| Measuring lengths: |
170 mm to 3040 mm |
| Measuring scale: |
glass scale |
Position of the
Reference mark:
(selectable) |
MSA 352.xx K:
Distance coded Reference marks (K): after travelling 20 mm the absolute
position will shown on the display.
MSA 352.xx:
Standard: Up to measuring length 920 mm one Reference mark in the middle
of the measuring length or 35 mm from both ends of measuring length,
measuring length 1040 mm and longer, 45 mm from both ends of measuring length.
Option: One Reference mark at any location, or two or more RI's separated by
distances of n x 50 mm |
| Output analog: |
typical 11,5 µApp |
| Output digital: |
square wave signals (single ended)
with integrated Subdividing Electronics
square wave signals (differential) via Line Driver RS 422 standard
with integrated Subdividing Electronics |
| |
|
*Specification subject to change without notice*
Dimensions and Mounting possibilities:
(Adobe Acrobat 5.0 or higher required) |
|
pdf