|
|
||
|
Z 710 |
Z 715 |
Z 820 |
| number of axis | 1, 2, 3 |
1, 2, 3 |
2, 3, 4 |
| programming of system parameters | x |
x |
x |
| selectable axis name | x |
x |
x |
| switchable for use on a lathe or milling machine | x |
x |
x |
| Software setup for fixing resolution, measuring step and counting direction |
x |
x |
x |
| function to delete a parameter | x |
x |
x |
| Reset- and Preset input (Reset of the displays by pressing one button) |
x |
x |
x |
| addition/subtraction of the display value with the keybord | x |
x |
x |
| bolt hole pattern, graduated circle function, rectangular drilling pattern |
x |
x |
x |
| Reference mark evaluation (quasi-absolut) | x |
x |
x |
| Hardware test and display test | x |
x |
x |
| 99 tool corrections (lathe mode) | NA |
x |
x |
| 99 datum points (milling mode) | NA |
x |
x |
| store values for axis display | x |
x |
x |
| absolute/incremental | x |
x |
x |
| mm/inch conversion | x |
x |
x |
| centering (divide by 2) | x |
x |
x |
| radius/diameter | x |
x |
x |
| each axis is adjustable for Rotary or Linear Encoder input. Rotary Encoder input will be displaying lines/revolution and decimal degrees |
NA |
x |
x |
| linear error correction programmable (4 point correction) | x |
x |
x |
| nonlinear axes-error correction | NA |
100 corr. |
4 corr. |
| shrinkage ±40% | x |
x |
x |
summing for two axis (Z + Z1) |
x |
x |
x |
| display for approximation to zero point | x |
x |
x |
| feed display | NA |
x |
x |
| axes movements with displayed remaining travel way | NA |
x |
NA |
| builtin stop-watch | NA |
x |
x |
| taper function | NA |
x |
x |
| spindle speed display | NA |
x |
x |
| skew compensation | NA |
NA |
NA |
| Bi-directional RS 232 interface to connect a printer or a personal computer (control system with extern commands) Baudrate and data format are adjustable via software |
NA |
o |
o |
| 7 free programmable switch off and pre-switch off points with relay output, programming to a 0,1 sec. short signal or a direction signal |
NA |
NA |
o |
| 8 free programmable switch off and pre-switch off points with relay output, programming to a 0,1 sec. short signal or a direction signal |
NA |
o |
NA |
| edge probe input | NA |
o |
x |
| output for constant surface speed | NA |
o |
o |
| external Reset for each axis | NA |
NA |
o |
| external input | NA |
NA |
o |
| program store for 500 sets | NA |
NA |
o |
| special display for spark erosion | NA |
o |
o |
| compensation for grinding wheels | NA |
o |
o |
| * = DRO for spark erosion machines | x = standard |
| ** = DRO for surface grinders | o = optional |
| NA = Not Available | |
Technical Data: |
|
| Power supply: | 115/230 V~ (switch adjustable) |
| Power consumption: | 20 VA (Z 7xx series with 3 axes) 30 VA (Z 8xx series with 4 axes) |
| Display: | 8 digits plus sign and one digit for axis display |
| Monitor display: | 10 digit alphanumeric display |
| Color of display: | green |
| Height of display: | 14,5mm |
| Overlay: | Polyester, Resistant to scratches and cutting fluid. |
| Resolution: | selectable (depending on the Linear Encoder) |
| Input: | square wave TTL signals |
| Permissible input frequency: | 1 MHz |
| Environmental sealing (acc.to DIN 40050) | IP 53 |
| *Specification subject to change without notice* | |
| Dimensions Z 7xx series |
 |
| Dimensions Z 8xx series |
 |
